5. Insert the front side of the new staple pack into the staple cartridge, then push the rear side into
the cartridge.
6. Grasp the new staple cartridge by the orange handle, then insert the cartridge into the stapler
assembly until the staple cartridge clicks into place.
7. Return the stapler assembly to its original position, then close the finisher door.
Replacing Staples in the Booklet Maker of the Business Ready Finisher
Caution: Do not perform this procedure when the printer is copying or printing.
1. Open the front door of the Business Ready Finisher.
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
281
Maintenance
To Next Page
Loading...
Need help?
General
