8. Grasp the orange handle, then insert the cartridge into the stapler assembly until the cartridge
clicks into place.
9. Close the finisher front door.
Clearing Booklet Staple Jams in the Office Finisher
WARNING: Do not perform this procedure while the printer is printing.
1. Open the finisher side cover.
2. If the staple cartridges are not visible, grip the vertical panels at the left and right of the opening
and slide the panels to the center.
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
339
Troubleshooting