Xerox B230 Quick Reference Guide

3. Remove the jammed paper.
CAUTION—HOT SURFACE: The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching it.
Note: Make sure that all paper fragments are removed.
4. Insert the imaging unit.
5. Close the door.
PPaappeerr JJaamm iinn tthhee RReeaarr DDoooorr
1. Open the rear door.
CAUTION—HOT SURFACE: The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching it.
2. Open the fuser access door.
3. Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
4. Close the fuser access door.
5. Close the rear door.
PPaappeerr JJaamm iinn tthhee DDuupplleexx UUnniitt
1. Pull out the duplex unit, and then remove the jammed paper.
Warning: To prevent damage from electrostatic discharge,
touch any exposed metal frame of the printer before
accessing or touching interior areas of the printer.
Note: Make sure that all paper fragments are removed.
2. Insert the duplex unit.
6

Xerox B230 Specifications

General

Brand	Xerox
Model	B230
Category	Printer
Language	English