5. Remove the imaging unit.
WWaarrnniinngg——PPootteennttiiaall DDaammaaggee:: Do not expose the imaging unit to direct light for more than 10
minutes. Extended exposure to light may cause print quality problems.
WWaarrnniinngg——PPootteennttiiaall DDaammaaggee:: Do not touch the photoconductor drum. Doing so may affect the
quality of future print jobs.
6. Remove the jammed paper.
CCAAUUTTIIOONN——HHOOTT SSUURRFFAACCEE:: The inside of the printer might be hot. To reduce the risk of injury from a
hot component, allow the surface to cool before touching it.
Note: Make sure that all paper fragments are removed.
272 Xerox
®
B305/B315 Multifunction Printer User Guide
Troubleshoot a problem
To Next Page
Loading...
