Xerox C230 - Caution-Hot Surface

1. Standard output tray
2. Manual feeder
3. Standard tray
4. Door B
PPaappeerr JJaamm iinn tthhee SSttaannddaarrdd TTrraayy
1. Open door B.
CAUTION—HOT SURFACE: The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching it.
2. Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
3. Close the door.
4. Remove the tray and the manual feeder.
5. Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
6. Insert the manual feeder and the tray.
6