Xerox Color C60

Other manuals for Xerox Color C60

Questions and Answers:

C
Cheryl WardAug 12, 2025
How to fix Xerox All in One Printer that does not turn on?
- D
  Danny KaufmanAug 13, 2025
  If your Xerox All in One Printer doesn't turn on, first ensure the power switch on the Control Panel is turned off, wait two minutes, and then turn it back on. Also, check that the main power switch behind the front cover is in the On position. Verify that the power cord is securely plugged into the outlet. Try plugging another electrical appliance into the same outlet to ensure the outlet is working correctly. If not, try a different outlet. Ensure the printer is connected to a power source that matches the electrical specifications.
J
Jerome RobertsonAug 20, 2025
Why does my Xerox All in One Printer keep turning off?
- K
  Keith MartinezAug 20, 2025
  If your Xerox All in One Printer frequently resets or turns off, ensure the power cord is correctly plugged into both the printer and the outlet. Turn off the printer, check the power cord, and then turn the printer back on.
J
Joseph HartmanAug 25, 2025
How to stop Xerox All in One Printer from pulling multiple sheets?
- J
  James NixonAug 25, 2025
  If your Xerox All in One Printer is pulling multiple sheets together, remove some of the paper from the tray, ensuring you do not load paper past the fill line. Also, remove the media, align the front edges, and then reload it.
A
Ashley RasmussenAug 27, 2025
What to do if paper jam message stays on Xerox All in One Printer?
- J
  Jonathan ScottAug 27, 2025
  If the paper jam message persists on your Xerox All in One Printer, recheck the media path and ensure all jammed paper has been removed.
G
Glen MedinaAug 31, 2025
Why is my Xerox All in One Printer printing so slow?
- J
  Julie BellAug 31, 2025
  If printing takes too long on your Xerox All in One Printer, consider these factors: * Printing with special media takes more time, so ensure the media type is correctly set in the printer driver and on the printer's Control Panel. * The printer takes time to start printing from power saving mode. * If the print job is very complex, simply wait, as no action is needed.
B
Bobby GraySep 4, 2025
Why Xerox All in One Printer has problems with 2-sided printing?
- E
  Edward CrawfordSep 4, 2025
  If you are experiencing 2-sided printing problems with your Xerox All in One Printer, ensure that you are using the correct media. Envelopes, labels, gloss, and extra heavyweight stock cannot be used for 2-Sided Printing. In the print driver, choose 2-Sided Printing.
S
singhjohnSep 8, 2025
How to load envelopes in Xerox All in One Printer Tray 5?
- T
  turnerwilliamSep 8, 2025
  Load the envelopes facedown in Tray 5 (Bypass Tray) with the flaps closed, on the leading edge.

Xerox Color C60 Specifications

General

Print Speed Color	Up to 60 ppm
Print Speed Black and White	Up to 65 ppm
Print Resolution	2400 x 2400 dpi
Maximum Monthly Duty Cycle	300, 000 pages
Duplex Printing	Automatic
Supported Operating Systems	Windows, Mac OS, Linux
Connectivity	Ethernet
PDL	PCL 5c, PCL 6, Adobe PostScript 3
Supported Media Sizes	A5