Xerox Color C60 User Manual

Note
Depending on the type of paper that is being stapled, the stapled nails may be bent. If
the bent nails are stuck inside the machine, they may eventually cause paper jams.
Remove the bent staple when opening the staple cartridge cover. If you do not remove
the bent staple, a staple jam may occur as a result. Use the staple cartridge cover only
when removing the bent staple.
Staple Jams in the Standard Staple Cartridge
Note
Always check inside the finisher for any individual staples or staple remnants.
1. Make sure that the machine has stopped printing.
2. Open the Right Cover on the finisher.
3. Grasp the Staple Cartridge handle located at R1, and pull out the staple cartridge
from the finisher.
4. Check the inside of the finisher for any remaining staples, and if necessary, remove
them.
5. Open the staple cartridge unit as shown and remove the jammed staple.
Xerox
®
Color C60/C70 Printer13-34
User Guide
Standard/Booklet Maker Finisher

Xerox Color C60 Specifications

General

Print Speed Color	Up to 60 ppm
Print Speed Black and White	Up to 65 ppm
Print Resolution	2400 x 2400 dpi
Maximum Monthly Duty Cycle	300, 000 pages
Duplex Printing	Automatic
Supported Operating Systems	Windows, Mac OS, Linux
Connectivity	Ethernet
PDL	PCL 5c, PCL 6, Adobe PostScript 3
Supported Media Sizes	A5