Maintenance Safety
Your Xerox
®
printer and supplies are designed and tested to meet strict safety
requirements. Safety requirements include safety agency evaluation and certification,
and compliance with electromagnetic regulations and established environmental
standards. Refer to these instructions to ensure the continued safe operation of your
printer. For details, contact your Xerox
®
representative.
• Follow all warnings and instructions marked on, or supplied with, the product, options,
and supplies.
• Do not attempt any maintenance procedure that is not specifically described in the
documentation supplied with your printer.
• Always exercise care when moving or relocating your printer. Contact your Xerox
®
representative to arrange the relocation of your printer.
• Never throw toner, print/drum cartridges, or toner containers into an open flame.
Warning
Before cleaning the printer, unplug it from the electrical outlet.
Do not use aerosol cleaners. Aerosol cleaners can cause explosions or fires when used
on electromechanical equipment.
The metallic surfaces in the fuser area are hot. To avoid personal injury, use caution.
Do not attempt to remove paper that is jammed deeply inside the product. Switch off
the product promptly and contact your local Xerox
®
representative.
Do not apply excessive force on the document glass.
Do not override any electrical or mechanical interlock devices.
1-7Xerox
®
Color C60/C70 Printer
User Guide
Safety
To Next Page
Loading...
Need help?
General
