To invert images:
1. Touch Copy on the touch screen, then touch the Layout Adjustment tab.
2. To mirror images, touch Invert Image, then touch Mirror Image. The default is
Normal Image, which does not mirror the images.
3. To create negative images, touch Negative Image. The default is Positive Image,
which does not print the image as a negative.
4. Touch Save.
Output Format Adjustments
Use the Output Format tab to make the following changes:
• Creating Booklets
• Including Covers
• Page Layout
• Creating Posters
• Adding Annotations
• Adding Watermarks
• ID Card Copy
• Tab Margin Shift
Creating Booklets
Copies can be printed in the form of a booklet. The page images are reduced to print
two images per side of each printed page. The pages can then be folded and stapled
manually, or with the appropriate finisher, they can be creased and stapled automatically.
Note
In this mode, the printer does not print the copies until it has scanned all the originals.
To create a booklet:
1. Touch Copy on the touch screen, then touch the Output Format tab.
2. Touch Booklet Creation, then touch On under Booklet Options.
3. Touch Original Input, then touch 1-Sided Originals, 2-Sided Originals, or 2-Sided
Rotate Side 2.
4. Folding: If a finisher with booklet making capabilities is installed, touch Off, Fold
Only, or Fold and Staple.
5. You can add margins in the center binding area to compensate for the thickness of
the booklet:
a. Touch Binding Shift, then touch the plus or minus (+/-) buttons to set the shift.
b. Touch Save.
6. To add covers, touch Covers, then touch Blank Cover, Print on Both or 1-Sided
Covers Print Outside.
Xerox
®
Color C60/C70 Printer6-14
User Guide
Copying
To Next Page
Loading...
Need help?
General
