Booklets
With 2-sided printing, you can print a document in the form of a small booklet. Create
booklets for any paper size that is supported for 2-sided printing. The driver automatically
reduces each page image and prints four page images per sheet of paper (two on each
side). The pages are printed in the correct order so that you can fold and staple the
pages to create the booklet.
Note
Booklets can be created using 8.5 x 11 in. (A4 210 mm x 297 mm) paper and 11 x 17
in. (A3 297 mm x 420 mm) paper.
Some print drivers enable you to specify the gutter and creep.
• Gutter: Specifies the horizontal distance (in points) between the page images. A
point is 0.35 mm (1/72 in.).
• Creep: Specifies how much the page images are shifted outward (in 10ths of a point).
This compensates for the thickness of the folded paper, which otherwise would cause
the page images to shift slightly outward when folded. You can select a value from
zero to 1 point.
If your printer also includes a finisher with a booklet maker, you can use the features of
that device for more robust booklet making capabilities.
Cover Pages
A cover page is the first or last page of a document. You can choose a different paper
source for the cover page than for the body of a document. For instance, use your
company letterhead for the first page of a document, or use heavyweight paper for the
first and last pages of a report.
• Use the applicable paper tray as the source for printing cover pages.
Xerox
®
Color C60/C70 Printer5-6
User Guide
Printing
To Next Page
Loading...
Need help?
General
