Standard Finisher/Booklet Maker Finisher
1 Post Process Inserter
2 Top Tray
3 Stacker Tray
4 Booklet Tray
5 Folder Output Tray
6 Front Cover
1 Top Tray
2 Stacker Tray
3 Front Cover
The Standard Finisher and Booklet Maker Finisher provide a range of finishing/folding options.
Note
The required Interface Module acts as a communication device and paper path between the
printer and the Light Production C Finishers. It is required for both finishers.
The Post Process Inserter is standard on these devices and is used to load paper that serves
as separators and covers. This tray holds up to 200 sheets.
The Top Tray is used for stacked output and can receive up to 500 sheets of 20 lb. (80 gsm)
paper.
The Stacker Tray is used for offset and/or stapled output and can hold up to 3,000 sheets of
20 lb. (80 gsm) paper.
The Bottom Tray is the optional Booklet Maker Tray and is used for receiving saddle-stapled
booklets.
The Booklet Maker Finisher contains all of the features of the Standard Finisher but also creates
saddle stitched bookets of up to 25 sheets and from 8.5 x 11 in./A4 or 12 x 18 in./SRA3.
The optional Folder is used for C-folding and Z-folding of 8.5 x 11 in./A4 output and 11 x 17
in./A3.
Xerox
®
Color C60/C70 Printer2-12
User Guide
Product Overview
To Next Page
Loading...
Need help?
General
