Xerox Color C60 User Manual

Printer Resets or Turns Off Frequently
SolutionsProbable Causes
Turn off the printer, confirm that the power cord is correctly
plugged into the printer and the outlet, then turn on the
printer.
The power cord is not correctly
plugged into the outlet.
Contact your local Xerox service representative with the
fault information. Check the fault history. For details, see
Control Panel Messages.
A system error occurred.
2-Sided Printing Problems
SolutionsProbable Causes
Make sure that you are using correct media. For details,
see Accepted Media. Envelopes, labels, gloss, and extra
heavyweight stock cannot be used for 2-Sided Printing.
In the print driver, choose 2-Sided Printing.
Media or settings are not correct.
Scanner Error
SolutionsProbable Causes
Turn off the printer using the power button visible on
the right side of the printer top panel. Wait two minutes,
then turn the printer on. Ensure that the main power
switch behind the front cover of the printer is in the On
position.
Scanner is not communicating.
Troubleshooting Paper Jams
The printer is designed to function with minimal paper jams using Xerox-accepted media
types only. Other media types may cause more frequent paper jams. If accepted media
is jamming frequently in one area, that area may need to be cleaned or repaired.
The Printer Pulls Multiple Sheets Together
SolutionsProbable Cause
Remove some of the paper. Do not load paper past the
fill line.
The paper tray is too full.
Remove the media, align the front edges, then reload
it.
The front edges of the paper are not
even.
10-3Xerox
®
Color C60/C70 Printer
User Guide
Troubleshooting

Xerox Color C60 Specifications

General

Print Speed Color	Up to 60 ppm
Print Speed Black and White	Up to 65 ppm
Print Resolution	2400 x 2400 dpi
Maximum Monthly Duty Cycle	300, 000 pages
Duplex Printing	Automatic
Supported Operating Systems	Windows, Mac OS, Linux
Connectivity	Ethernet
PDL	PCL 5c, PCL 6, Adobe PostScript 3
Supported Media Sizes	A5