PPaappeerr JJaamm iinn tthhee MMaannuuaall FFeeeeddeerr
1. Remove the tray and the manual feeder.
2. Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
3. Insert the manual feeder and the tray.
PPaappeerr JJaamm iinn DDoooorr BB
1. Open door B.
CAUTION—HOT SURFACE: The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching it.
2. Remove the jammed paper from any of the following areas:
Note: Make sure that all paper fragments are removed.
• Fuser area
• Below the fuser area
8
To Next Page
Loading...
