System Guide 1-7
Gateway and Network Configuration
Changing attributes support
These attributes can be changed via ‘SET’:
• prtGeneralServicePerson
• prtAuxillarySheetStartupPage
• prtGeneralPrinterName
• hrFSLastFullBackupDate
• hrFSLastPartialBackupDate
• sysContact
• sysLocalization
•sysName
For additional information on attributes, MIBs, and localization,
see device profiles.
SNMP MIB support
The Xerox FreeFlow Print Server SNMP MIB files use the Xerox
Common Management Interface (XCMI) version 4.0. The
following list indicates the MIB files included for this version of the
Print Server software:
• rfc1213 - RFC1213-MIB (MIB-II) - specifically system, if
numbers, at, ip, tcp, icmp, udp, snmp
Localization of
Attributes
Y Y N N
Finishing Capability for
a Device MIB
YN NY
Finishing Capability for
a Supply MIB
YN NY
Finishing Capability for
Attributes
YN NY
Print Working Group
Job Monitor MIB
YY NY
Auto Meter Reading/
Billing
YY NY
Enhancement to
attributes
YY NY
Feature
DT 61XX
and DP
1xx
EPS 1XX iGen
Nuvera
1xx
To Next Page
Loading...
