System Guide v
Introduction
The System Guide provides the information needed to perform
system administration tasks for configuring and maintaining the
Xerox FreeFlow
® Print Server for printing systems.
About this guide
This guide is intended for network and system administrators
responsible for setting up and maintaining Xerox printers with
Xerox FreeFlow Print Server software. System administrators
should have an understanding of the Sun workstation, a familiarity
with Solaris, and with basic UNIX commands. This includes the
use of text editors such as vi or textedit and the ability to
maneuver within the Solaris environment. To enable them to setup
a customer site, system administrators are expected to have a
working knowledge of Local Area Networks (LANs),
communication protocols, and the applicable client platforms.
Contents
In general, this document covers information about the Xerox
FreeFlow Print Server that is not covered in the Online Help or
other available guides.
The following list describes the contents of this guide:
• Gateway and Network Configuration
• Backup and Restore
• Printing
• Finishing
• Fonts
• Accounting and Billing
• Troubleshooting
• Hints and Tips
Conventions
This guide includes the following conventions:
• Angle brackets - Variable information that is displayed on your
screen is enclosed within angle brackets; for example, “Unable to
copy <filename>.”
To Next Page
Loading...
Need help?
General
