System Guide 3-5
Printing
submission protocol. This allows the internal copy count set by the
PDL to take precedence.
The following utility allows a customer to return the Print Server to
its original behavior, that is, either imply a copy count of one when
none is specified or honor a copy count of one if specified on the
command line. This copy count of one takes precedence over the
copy count set by the PDL.
Syntax of the utility:
setlpcopycount -f option0 - Specifies that LP will set a copy count
of 1 if received.1 - Specifies that LP will ignore a copy count of 1 if
received.(default)No option will display current setting
Example:
printserver_printer% su rootPassword:# cd /opt/XRXnps/bin/#./
setlpcopycount -f 0
LP/LPR compatibility with Print Server
Print Server-driven systems can now be targeted to existing NPS
customers, both black and white and highlight color. The Print
Server now supports the following options.
NPS lp-o and lpr-c
The lp/lpr options are received by the LPR gateway and mapped
to Print Server attributes.
The following NPS lp/lpr options are supported:
1. NPS general options
• C”(acct=<text)” (account information)
• C”(collated)”
• C”(uncollated)”
• C”(copies=<n>)”
• C”(drilled)”
•
C”(format
=<pdl>)
”
(document
format)
• C”(media=<n>x<m>)”
• C”(pr=<n>-<m>)” (pages to print)
• C”(size=<n>)”
• C”(xshift)” (horizontal image shift)
• C”(yshift)” (horizontal side 2 shift)
• C”(xshiftback=<n>)” (vertical image shift)
• C”(yshiftback=<n>)” (vertical side 2 shift)
• C”(<nostich”l nostaple l stich l staple>l
To Next Page
Loading...
Need help?
General
