Xerox FREEFLOW 701P25032 User Manual

System Guide 1-11
Gateway and Network Configuration
Although the default is set so that the SNMP locality and unit of
measure is the same as that of the LUI, the new feature allows the
administrator to select a different locality or unit of measure for the
SNMP gateway.
Remote SNMP clients can control the localization of text objects
of syntax
LocalizedDescriptionStringTC by setting the MIB object:
prtGeneralCurrentLocalization
Access is changed from Read-only to Read/Write.
However, Remote SNMP clients cannot control the units of
measure localization of numeric MIB objects. The localization of
these objects can only be controlled from the LUI.
SNMP configuration variables
Of the many parameters that are available for SNMP
configuration, only the ones of common interest to Xerox
customers are shown in the following table:
Table 1-2
Configuration Variables
Parameter Name Description
Value
Range
Default
Value
CommandLine Turn on/off the following flags:
–l: logging to SNMP_DEBUG_LOG
–w: logging to window
Printer operator The name of the printer operator String
(0...127)
<empty>
Printer administrator The name of the printer administrator String
(0...127)
<empty>
Printer administrator
location
The location of the office of the printer
administrator
String
(0...127)
<empty>
Printer administrator
Phone
The telephone number for contacting the
printer administrator
String
(0...127)
<empty>
Printer location The location of the printer String
(0...127)
<empty>

Xerox FREEFLOW 701P25032 Specifications

General

Brand	Xerox
Model	FREEFLOW 701P25032
Category	Software
Language	English