Xerox Office Finisher LX - Loading Booklet Maker Staples

Loading Booklet Maker Staples
1-8
Office Finisher LX - User Guide
Loading Booklet Maker
Staples
If the optional Booklet Maker is installed, a
message appears on the touch screen when the
unit runs out of staples. When the message is
displayed, load a new staple cartridge into the
Booklet Maker. The Booklet Maker contains two
staple cartridges.
Make sure that the machine has stopped, and
open the side cover of the finisher.
Hold the tabs on both sides of the booklet staple
cartridge and pull the cartridge out of the Booklet
Maker.
Hold the tabs on both sides of the new booklet
staple cartridge, and insert it into the original
position until it clicks.
NOTE: If you have trouble inserting the cartridge,
make sure that the staples in the cartridge are
properly in place.
Move the Booklet Maker Staple Cartridges so that
both Staple Cartridges are easily accessible.