Office Finisher LX - User Guide 1-17
Emptying the Hole Punch Waste Container
Emptying the Hole Punch
Waste Container
Make sure that the machine has stopped, and
then open the Interface Cover on the Office
Finisher LX.
NOTE: Leave the power on when emptying the
Hole Punch Waste Container. If the power is
turned off, the machine will not recognize that the
waste container has been emptied.
Pull out the Hole Punch Waste Container.
Dispose of the Hole Punch waste.
Push in the Hole Punch Waste Container.
Close the Interface Cover on the Office Finisher
LX.
NOTE: If the Interface Cover is not completely
closed, a message will appear and the machine
will not operate.
To Next Page
Loading...
