Xerox Office Finisher LX - Page 13

Office Finisher LX - User Guide 1-11
Clearing Staple Jams
Remove the entire sheet of staples, including the
jammed staple.
Pull down the front lever on the staple cartridge
until it clicks into place.
Hold the staple cartridge by the orange lever, and
return the cartridge to its original position.
Close the front cover of the Office Finisher LX.
NOTE: Remove the entire staple sheet. Do not
remove the jammed staple only.
If the staples cannot be removed after carrying out
the above procedures, contact the Xerox
Welcome Center.
Pull up the front lever on the staple cartridge.