Xerox PHASER 5400 - Printing Jobs

36 Xerox Phaser 5400 Laser Printer
Printing Jobs
Printing Jobs
When you print a job, you can use the print driver to select the
following features:
 Paper source
 Output bin — see page 38.
 Paper size and media to use:
 Special paper — see page 39.
 First page different — see page 39.
 Envelopes — see page 41.
 Labels — see page 43.
 Transparencies — see page 45.
 Single- or double-sided printing (if the Duplex Module is
installed); see page 47.
 Orientation — see page 49.
For information on the following features, refer to the printer driver
help or the Advanced Features and Troubleshooting Manual on your
printer’s CD-ROM:
 Collating copies
 Custom (nonstandard) paper sizes, suitable for the Multi-sheet
Bypass Feeder or any of the 500-sheet paper trays.
 Draft mode, which reduces the amount of toner required per page
at the expense of lower print quality (intended for occasional
proof printing of high-density documents).
 Booklet-style printing (if your printer has the optional Duplex
Module).