How to fix Xerox Phaser 5335 Printer that will not switch on?
First, ensure the power switch is in the position. If that doesn't work, try switching the power off, firmly plugging the power cord into both the power connector and the outlet, and then switching the power back on. Also, make sure the printer is connected to a power outlet that provides the correct voltage and current, and avoid sharing the outlet with other devices.
What to do if my Xerox Phaser 5335 Printer output is too light (faded or unclear)?
If the output from your Xerox printer is too light, try these solutions: Ensure you are using fresh paper that is appropriate for the printer. If the toner save feature is enabled, disable it by clearing the [Draft Mode] check box on the [Detailed Settings] tab in your print driver. Also, adjust the print density settings under the [Graphics] tab > [Image Settings] in your print driver. Finally, check and change the [Paper Type] setting and try printing again.
What to do if my Xerox Phaser 5335 Printer will not print?
If your Xerox printer is not printing, and your computer is connected via a parallel cable, check if your computer supports bi-directional communication. If not, disable bi-directional communication on the printer's control panel. If your printer is connected to a network, verify that the printer's IP address is set correctly.
Why does my Xerox Printer not correctly select a paper tray?
If your Xerox printer isn't selecting the correct paper tray, and you switched on the power when the trays were removed, push the trays firmly into the printer, and switch the printer off and then on again. Also, ensure the paper size specified with the paper size dial matches the size of paper loaded in the tray.
How to resolve equally spaced smears on output from Xerox Phaser 5335 Printer?
To resolve equally spaced smears on your Xerox printer's output, try printing a couple of blank sheets to clean the paper path. If that doesn't work, clean the interior of the printer.
How to resolve the lamp is lit on Xerox Phaser 5335?
If the lamp is lit on your Xerox printer, check the control panel for an error message. Follow the instructions provided in the message to clear the error.
Why is the display blank on my Xerox Phaser 5335 Printer?
The blank display on your Xerox printer might be due to the Power Saver mode. Press the button on the control panel to exit this mode. If that doesn't work, check that the power cord is firmly plugged into the power outlet and reboot the printer.
What to do if my Xerox Phaser 5335 Printer requested a print job, but the lamp does not light or blink?
If the lamp on your Xerox printer doesn't light up when you request a print job, first ensure the interface cable is firmly plugged in. If the printer is offline, press the button. If the menu screen is displayed, press the button to exit. Check that the ports to be used are enabled and the protocols are correctly set on CentreWare Internet Services. Finally, verify that the operating environment of your computer, including the print driver, is correctly configured.
How to fix Xerox Phaser 5335 that makes odd noise?
If your Xerox printer is making odd noises, make sure it's installed on a level and sturdy surface. Also, check that the paper trays are pushed in completely. If the noise persists, switch the power off and check for any foreign objects inside the printer and remove them.
How to fix Xerox Printer that does not switch to the Sleep mode?
If your Xerox printer is not switching to Sleep mode, ensure that the sleep mode is enabled. On the control panel, set [Sleep Mode] to [Enable].
Information on obtaining assistance and support from Xerox.
Details on locating and recording the printer's serial number.
Explains warning symbols and their meanings for user safety.
Guidelines for performing printer maintenance procedures.
Specific certification mark indicating conformity with EU directives.
Regional compliance information for European countries.
Disposal guidance for end-of-life electrical and electronic equipment.
Disposal guidance for business use electrical and electronic equipment.
Details on supported operating systems and network environments.
Instructions for connecting the printer via various cable types.
Configuration steps for network setup, including IP addressing.
Procedure to enable specific communication ports on the printer.
How to remotely manage and configure the printer via a web browser.
Essential steps for installing the printer driver for printing.
Overview of the printer's main hardware parts and their functions.
Explanation of the printer's control panel buttons and indicators.
Describes the print and menu screens on the printer's display.
Procedures for powering the printer on and off.
Information about the printer's built-in circuit breaker.
How to configure and use the printer's power saving features.
Procedures for managing print jobs on the printer and computer.
How to transfer printer settings to the print driver via SNMP.
Basic steps for sending print jobs from Windows applications.
Instructions for loading and printing on envelopes.
Instructions for loading and printing on transparencies.
Guides for loading and configuring custom paper sizes.
How to set paper types for trays via control panel or driver.
How to use the Secure Print feature for confidential documents.
How to use the Sample Print feature for proofing.
Information on supported paper types, sizes, and handling.
Lists types of paper and media to avoid.
Guidelines for proper paper storage to prevent issues.
Instructions for loading paper into various printer trays.
Details on setting paper sizes and types for each tray.
How the printer automatically selects paper trays.
Introduction to the printer's control panel menu structure.
Procedure for navigating and changing settings via the control panel.
Detailed explanation of common menu items and their settings.
Settings for printer language emulation modes (ESC/P, PCL, PostScript).
How to print various reports and lists from the control panel.
How to view the printer's page count on the control panel.
Access point for administrative settings.
Configuration of network interfaces and ports.
Controls data reception based on IP addresses for security.
Enables encrypted HTTP communication for enhanced security.
Configuration of printer behaviors like audio tones and power saving.
Settings for various audio alerts from the printer.
Settings for controlling access to the control panel.
Setting the duration before entering low power mode.
Enabling or disabling the sleep mode feature.
Setting printer behavior when toner is low.
Feature for secure printing of confidential documents.
Configuration for density, paper trays, and auto selection.
Setting the type of paper loaded in each tray.
Setting priority for paper types in auto tray selection.
Setting priority for paper trays in auto tray selection.
Configuring paper sizes for each tray.
Assigning custom names to paper types for trays.
Setting the location for printing user IDs on documents.
How the printer handles mismatches between job and paper size.
Accessing printer maintenance functions.
Initializing memory, ports, and deleting data.
Configuration of printer behaviors like audio tones and power saving.
Step-by-step procedures for clearing paper jams in various locations.
Specific instructions for clearing jams in the bypass tray.
Specific instructions for clearing jams in trays 2 through 5.
Specific instructions for clearing jams in the fuser unit.
Specific instructions for clearing jams in the duplex unit.
Specific instructions for clearing jams in the output area.
Troubleshooting common hardware issues like power and noise problems.
Solutions for issues preventing or affecting printing.
Troubleshooting steps for poor print output quality.
Solutions for issues related to paper not feeding correctly.
Information on interpreting and resolving printer error messages and codes.
Troubleshooting steps for network connectivity and service issues.
Configuring IP address filtering for network security.
Procedures for replacing printer consumables like the print cartridge.
How to print various system reports and lists.
Using CentreWare Internet Services for remote printer monitoring.
Using PrintingScout tool to check printer and job status.
How to obtain printer status and notifications via email.
Overview and configuration of printer security settings.
How to view the printer's page count on the control panel.
Technical details and specifications of the printer.
Defines the printable region on the paper.
Details on printer consumables like print cartridges.
Details on printer replacement parts like maintenance kits.
How to get the latest print drivers from the Xerox website.
How to update the printer's embedded software.
Step-by-step guide for installing additional memory modules.
General notes and limitations regarding printer usage.
Notes and restrictions specific to the optional hard disk.
Notes and restrictions related to optional accessories.
Specific detail on how meter counts are handled for 2-sided pages.
How to navigate and operate the control panel buttons.
Methods for entering characters and numbers on the control panel.
Conventions used for navigating administrator menus.
Specific menu options related to printing functions.
To Next Page
General