Xerox Phaser 5335 User Manual

26 2 Basic Operation
2.3 About the Circuit Breaker
The printer has a circuit breaker on its rear left side.
In the event of current leakage, the breaker will automatically cut off the power circuit to
prevent any current leakages or fire from occurring.
If the circuit breaker trips, check insulation condition of the printer and then press the
<RESET> button.
If the insulation condition of the printer is not recovered, the circuit breaker trips again
immediately. In such case, contact your Customer Support Center or your dealer.
Once a month, switch the printer off and test if the breaker is functioning normally. Using a
failed breaker puts your printer at risk of electric shock.
If your circuit breaker is not functioning normally, contact your Customer Support Center or
your dealer.
RESET button

Xerox Phaser 5335 Specifications

General

Brand	Xerox
Model	Phaser 5335
Category	Printer
Language	English