x Before Using the Machine
Safety Notes
Read these safety notes carefully before using this product to make sure you operate
the equipment safely.
Your Xerox product and recommended supplies have been designed and tested to
meet strict safety requirements. These include safety agency approval, and
compliance to established environmental standards. Please read the following
instructions carefully before operating the product and refer to them as needed to
ensure the continued safe operation of your product.
The safety and environment testing and performance of this product have been verified
using Xerox materials only.
WARNING: Any unauthorized alteration, which may include the addition of new
functions or connection of external devices, may impact the product
certification. Please contact your authorized Service Provider for more
information.
Warning Markings
All warning instructions marked on or supplied with the product should be followed.
Maintenance Information
1. Any operator product maintenance procedures will be described in the customer
documentation supplied with the product.
2. Do not carry out any maintenance procedures on this product which are not
described in the customer documentation.
3. WARNING: Do not use aerosol cleaners. Aerosol cleaners can be explosive or
flammable when used on electromechanical equipment.
4. Use supplies and cleaning materials only as directed in the Operator section of
this manual.
5. Do not remove covers or guards that are fastened with screws. There are no parts
behind these covers that you can maintain or service.
WARNING This WARNING alerts users to areas of the product where there is
the possibility of personal injury.
WARNING This WARNING alerts users to areas of the product where there
are heated surfaces, which should not be touched.
WARNING This symbol indicates a Laser
is being used in the equipment and
alerts the user to refer to the appropriate safety information
WARNING This product must be connected to a protective earthing
circuit.
To Next Page
Loading...
