5.2 Setting the Common Menus 79
PS Job Time-out Sets the amount of time the printer waits for a print job. If a time-out occurs dur-
ing data reception, the printer stops the reception and prints the data that has
been received.
Specify the time-out value in 1 minute increments.
• [Off] (default)
Disables the job time-out.
• [1 Minutes] to [900 Minutes]
Note
• After changing this setting, reboot the printer.
Init PS Disk Initializes the PostScript information stored in the hard disk.
Note
• [Init PS Disk] appears only when the hard disk (optional) is installed.
Paper Select Mode Sets whether to enable the PostScript DMS (Deferred Media Selection) fea-
ture.
• [Auto] (default)
Enables the DMS feature.
•[Select From Tray]
Disables the DMS feature and selects a paper tray.
Note
• After changing this setting, reboot the printer.
Setting Item Description
To Next Page
Loading...
