Xerox Phaser 5335 User Manual

3.7 Printing After Checking the Print Result - Sample Print - 53
4. The [Paper/Output] tab appears.
5. From [Job Type], select [Sample Print] and then click [Setting].
The [Sample Print] dialog box appears.
6. Enter your user ID into [User ID].
The user ID can be up to 8 alphanumeric characters.
7. From [Retrieve Document Name], select [Enter Document Name] or [Auto Retrieve].
When [Enter Document Name] is selected, enter the desired document name in
[Document Name]. The document name can be up to 12 alphanumeric characters.
When [Auto Retrieve] is selected, the document name will be the name of the
document to be printed. If the printer cannot identify the name of the document, the
date and time that the document will be printed will be its name.
8. Click [OK] to close the [Sample Print] dialog box.
9. Click [OK] to close the [Printing Preferences] dialog box.
10. Click [Print] in the [Print] dialog box to start printing.
5
7
6

Xerox Phaser 5335 Specifications

General

Brand	Xerox
Model	Phaser 5335
Category	Printer
Language	English