Printing on Specialty Media
Phaser® 6300/6350 Color Laser Printer
3-32
5. On the control panel, select the paper type and size:
a. Select Change setup, and then press the OK button.
b. Select Labels, and then press the OK button.
c. Select the label sheet size, and then press the OK button.
6. In the printer driver, select either Labels as the paper type or Tray 1 (MPT) as the paper
source.
Printing Labels from Trays 2–5
1. Pull the tray out of the printer.
2. If necessary, open the paper guides:
■ Squeeze the green tab on the length guide, and then slide it back. The guide clicks into
place.
■ Slide the green side guides outward.
6300-035
6300-001
To Next Page
Loading...
