To Next Page
M
Mrs. Lisa PowersAug 1, 2025
What to do if there is a jam at Registration Roller in Xerox Printer?
- MMargaret RossAug 1, 2025
If there is a jam at the registration roller, follow these steps: First, completely pull Tray 2 out of the printer. Then, remove any jammed paper from inside the printer tray slot, making sure all scraps are removed. Next, insert Tray 2 back into the tray slot, pushing it in completely. After that, push up the latch on the front of the printer to open Front Door A, and remove any jammed paper. Finally, close Front Door A.
General
