Xerox Phaser 6300 - Setting the Control Panel Language; Setting the Printer Date and Time

Printer Settings
Phaser® 6300/6350 Color Laser Printer
5-9
Setting the Control Panel Language
To select the default control panel language, use one of the following options:
■ The printer’s control panel
■ CentreWare IS
Using the Control Panel
To select the default language on the control panel:
1. Select Printer Setup, and then press the OK button.
2. Select Control Panel Setup, and then press the OK button.
3. Select Language, and then press the OK button.
4. Select the desired language, and then press the OK button.
Using CentreWare IS
To change the default control panel language using CentreWare IS:
1. Launch your web browser.
2. Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3. Click Properties.
4. Select the General folder on the left sidebar, and then select Printer Defaults.
5. In the User Preferences area, select the language from the Set Control Panel Language
drop-down list.
6. Click the Save Changes button at the bottom of the screen.
Setting the Printer Date and Time
Some printer features, like Scheduled Warmup mode and Job Accounting, rely on the printer
date and time settings to initiate functions and report usage information. To change the printer
date and time, use one of the following options:
■ The printer’s control panel
■ CentreWare IS