Printer Settings
Phaser® 6300/6350 Color Laser Printer
5-2
Printer Settings
This section includes:
■ Controlling Startup Page Printing on page 5-2
■ Selecting Tray 1 (MPT) Behavior on page 5-3
■ Setting the Duration for Tray 1 (MPT) Prompts on page 5-4
■ Setting the Duration for Tray 2 - 5 Prompts on page 5-5
■ Changing the Power Saver Timeout on page 5-6
■ Changing the Power Saver Timeout on page 5-6
■ Changing Intelligent Ready Mode on page 5-7
■ Changing the Load Paper Timeout on page 5-8
■ Setting the Control Panel Language on page 5-9
■ Setting the Printer Date and Time on page 5-9
■ Setting the Timing for the Low Toner Warning Message on page 5-10
Note: Print the Menu Map to view the path to select other menu options.
Controlling Startup Page Printing
The printer can produce a Startup page each time the printer is turned on or reset. The factory
default is On. You can print the Startup page at any time from the Information Pages menu.
To turn on/off automatic printing of the Startup page, use one of the following options:
■ The printer’s control panel
■ CentreWare IS
Using the Control Panel
To turn on/off automatic printing of the Startup page on the control panel:
1. Select Printer Setup, and then press the OK button.
2. Select Printer Controls, and then press the OK button.
The Startup Page is highlighted. The end of the line displays the setting (On or Off).
3. Press the OK button to change the setting.
To Next Page
Loading...
