Determining Which Tray to Use
Phaser® 6300/6350 Color Laser Printer
3-2
Determining Which Tray to Use
To determine which tray to use and the control panel settings for printing the specialty media:
1. Find the media weight and size on the packaging label.
2. Print the Paper Tips page:
a. On the control panel, select Information, and then press the OK button.
b. Select Information Pages, and then press the OK button.
c. Select Paper Tips, and then press the OK button.
3. Find the media type, weight, and size on the Paper Tips page, and then find the
corresponding trays.
For example, if you are using letter-size Thin Card Stock within a weight range of
100-163 g/m
2
(36-60 lb. Cover), load the media in any tray. On the control panel:
a. Select Thin Card Stock if prompted for the paper type.
b. Select Letter (8.5 x 11 in.) if prompted for the paper size.
See also:
Printing Specialty Media from Tray 1 (MPT) on page 3-3
Printing Specialty Media from Trays 2–5 on page 3-4
To Next Page
Loading...
Need help?
General