To Next Page

To Previous Page

Printing Secure, Personal, Proof, and Saved Print Jobs

Phaser® 6300/6350 Color Laser Printer

1-17

Printing or Deleting Secure Print Jobs

To print or delete a secure print job, specify the four-digit password on the control panel:

1. Select Walk-Up Printing, and then press the OK button.

2. Select Secure Print Jobs, and then press the OK button.

3. Scroll to your User Name, and then press the OK button.

4. Scroll to the correct number for the first digit of the numeric password, and then press the

OK button to accept that digit.

5. Repeat Step 4 for the second, third, and fourth digits.

Note: If you enter less than four digits in the driver’s Password field, enter zeros before

your password so that there are four digits displayed on the control panel. For example, if

you entered 222 in the driver, enter 0222 on the control panel. Use the Back button to

return to a previous digit.

6. If you submitted more than one secure print job with that password, select the desired job

or select All of Them, and then press the OK button.

7. Select Print and Delete or Delete, and then press the OK button to print or delete the

job.

Printing or Deleting Personal Print Jobs

To print or delete a personal print job, select your user name on the control panel:

1. Select Walk-Up Printing, and then press the OK button.

2. Select Personal Print Jobs, and then press the OK button.

3. Select your User Name, and then press the OK button.

4. Select Print and Delete or Delete, and then press the OK button to print or delete all of

your personal print jobs.

Printing or Deleting Proof and Saved Print Jobs

To print a saved print job, print the remaining copies of a proof print job, or delete a saved or

proof print job, select the job name on the control panel:

1. Select Walk-Up Printing, and then press the OK button.

2. Select Proof Print Jobs or Saved Print Jobs, and then press the OK button.

3. Select your job name, and then press the OK button. (If you use the Windows NT printer

driver, select NT4User as the job name.)

4. Select Print and Delete (for proof prints), Print and Save (for saved prints), or

Delete, and then press the OK button.

5. If you are printing, scroll to the desired number of copies, and then press the OK button to

print the job.

Xerox Phaser 6300 Advanced Features Guide

Other manuals for Xerox Phaser 6300