Xerox Phaser 6300 - Page 2

Memory types for the Phaser 6300 and 6350 printers are:
Model Number Memory Type Volatility User Data
6300/N SDRAM Volatile Yes
1
EEPROM Non-Volatile No
2
Configuration Card Non-Volatile No
2
Flash / ROM Non-Volatile No
3
6300/DN SDRAM Volatile Yes
1
EEPROM Non-Volatile No
2
Configuration Card Non-Volatile No
2
Flash / ROM Non-Volatile No
3
6350/DP SDRAM Volatile Yes
1
EEPROM Non-Volatile No
2
Configuration Card Non-Volatile No
2
Flash / ROM Non-Volatile No
3
6350/DT SDRAM Volatile Yes
1
EEPROM Non-Volatile No
2
Configuration Card Non-Volatile No
2
Flash / ROM Non-Volatile No
3
6350/DX SDRAM Volatile Yes
1
EEPROM Non-Volatile No
2
Configuration Card Non-Volatile No
2
Flash / ROM Non-Volatile No
3
Hard Disk Non-volatile Yes
4
Notes:
1
SDRAM memory can be upgraded to 1024MB for all models
2
Contains printer configuration and operational parameters. It does not contain user print data.
3
Is used for firmware code and contains no user print data.
4
Hard drive may contain user print data and is an option for the other printer models.