To Next PageTo Next PageWhat does 'Low Density Xxx Cartridge' mean on Xerox Phaser 6500 and how to fix it?
If your Xerox Printer displays 'Low Density Xxx Cartridge', it means toner is not distributed evenly in the specified cartridge. Remove and shake the cartridge, then reinstall it.
How to fix blurry colors or white area around objects on Xerox Phaser 6500 Printer?
If the colors are blurry or there is a white area around objects on your Xerox Printer, perform an automatic color registration adjustment because the color-to-color alignment is not correct.
How do I resolve 'Jam at Tray 2' error on my Xerox Phaser 6500?
If your Xerox Printer displays 'Jam at Tray 2', it indicates that paper is jammed inside the paper tray. Open Tray 2 and remove the jammed paper.
What to do if condensation has occurred inside the Xerox Printer?
If condensation has occurred inside your Xerox Printer, turn on the printer and leave it on for at least one hour to get rid of the condensation.
Why are horizontal bands appearing on my Xerox Printer prints?
If horizontal bands appear on your Xerox Printer, replace the imaging unit because it has been exposed to too much light, possibly from leaving the front door open too long.
How to fix 'Load Tray Xxx' error on Xerox Phaser 6500 Printer?
If your Xerox Printer displays 'Load Tray Xxx', it means the printer has detected a paper size mismatch or no suitable paper is loaded in any of the trays. Open the specified tray, remove the paper, insert paper of the correct size, and then close the tray.
What to do if the Error indicator is on for Xerox Phaser 6500 Printer?
If the Error indicator is on for your Xerox Printer, check the control panel for an error message and correct the error as indicated.
How to troubleshoot Xerox Phaser 6500 when it has no power?
If your Xerox Printer has no power, first, ensure the power button is in the On position. If that's not the issue, check the power cord to see if it's disconnected or not securely connected; turn off the printer, reconnect the cord, and then turn it back on. Also, make sure the printer is connected to a power outlet with the correct voltage and not to an uninterruptible power supply or a power strip shared with high-power devices. Connect the printer to a suitable power outlet or a dedicated power strip.
Why is my Xerox Printer printing vertical black or color streaks?
If your Xerox Printer is producing vertical black or color streaks, the transfer belt unit may be old or damaged and require replacement. Ensure that the toner cartridges are Xerox toner cartridges and meet specifications; replace them if necessary. There may also be a problem with the toner cartridge for that color, so check the toner cartridge for damage and replace if necessary.
Why is my Xerox Phaser 6500 printing blank pages?
If your Xerox Printer is producing blank pages, remove the paper stack from the tray, fan it, then reinsert it to prevent multiple sheets from feeding at once. Verify that the toner cartridges are Xerox toner cartridges and meet specifications, replacing if necessary. Also, the transfer belt unit might be old or damaged and need replacement.
General| Monthly Duty Cycle | Up to 40, 000 pages |
|---|---|
| Duplex Printing | Manual |
| Print Technology | Laser |
| Maximum Print Resolution | 600 x 600 x 4 dpi |
| First Page Out Time | As fast as 12 seconds |
| Connectivity | USB 2.0, Ethernet |
| Paper Capacity | 250 sheets + 1 sheet bypass tray |
| Supported Operating Systems | Windows, Mac OS, Linux |
| Print Speed | Up to 24 ppm (color) / Up to 24 ppm (black) |
