Xerox Phaser 6700 - Maintenance: Toner Cartridge Replacement

Maintenance – replace toner cartridge
NOTE: A message will be displayed on the Control Panel when a Toner (Dry
Ink) Cartridge needs to be replaced. A video of the replacement procedure is
viewable on the Control Panel as well.
CAUTION D t t l i l t t T
CAUTION
:
D
o
no
t
use
warm
wa
t
er
or
c
l
ean
i
n
g
so
l
ven
t
s
t
o
remove
T
oner
from your skin or clothing. This will set the Toner and make it difficult to
remove. If any Toner gets on your skin or clothing, use a brush to remove
the Toner, or wash it off with cold water and mild soap.
Open the front door.
Gently pull the Toner Cartridge straight out of the printer.
CAUTION: Be careful not to spill any Toner when handling the cartridge.
NOTE: You can dispose of the used cartridge in the box that the new cartridge
came in.
Before unpacking the new Toner Cartridge, gently shake it 3 or 4 times to
distribute the Toner and remove the cartridge from its packaging.
Align the arrow on the cartridge with the arrow on the printer, and then push the
cartridge in slowly until it stops.
7
Close the front door.