Xerox
®
VersaLink
®
C405/B405 Multifunction Printer
Security Function Supplementary Guide
12
Initial Settings Procedures
Using Embedded Web Server
This section describes the initial settings related to security features, and how to set them on the
Embedded Web Server
.
Preparations for Settings on the Embedded Web
Server
Prepare a computer supporting the TCP/IP protocol to use the
Embedded Web Server
.
Embedded Web Server
supports the browsers that satisfy TLS conditions.
1.
Open your Web browser, enter the TCP/IP address of the machine to the URL bar, and press the
<
Enter
> key.
2.
Select
Log In
on the Embedded Web Server.
3.
Select
admin
.
4.
Enter the password.
5.
Select
Log In
.
Change the System Administrator’s Password
1.
Select
Permissions
.
2.
Select
admin
.
3.
Select
Change Password
.
4.
Enter the old password in
Old Password
.
5.
Enter the new password in
New Password
.
6.
Enter the new password in
Retype New Password
.
7.
Select
OK
.
Set EIP
For the secure operation of the machine, follow the procedure below to set
EIP
to
Disabled
1.
Select
Apps
.
2.
Select
EIP Settings
.
3.
Disable all services.
Set My Folder
For the secure operation of the machine, follow the procedure below to set
My Folder
to
Disabled
To Next Page
Loading...
