Xerox versalink C7025 User Manual

4. Remove the new stapler cartridge from its packaging. Hold the tabs on both sides of the new
staple cartridge, then reinsert the staple cartridge into the original position in the finisher.
Note: The booklet maker uses two staple cartridges. Booklet stapling requires that both
staple cartridges contain staples.
5. Repeat the procedure for the other staple cartridge.
6. Close the finisher side cover.
RReeppllaacciinngg SSttaappllee CCaarrttrriiddggeess iinn tthhee OOffffiiccee FFiinniisshheerr
RReeppllaacciinngg SSttaapplleess iinn tthhee MMaaiinn SSttaapplleerr ooff tthhee OOffffiiccee FFiinniisshheerr
Caution: Do not perform this procedure while the printer is printing.
1. Open the finisher front door.
2. Reach into the finisher cabinet and pull the stapler toward you until it stops.
Xerox
®
VersaLink
®
C70XX Color Multifunction Printer
User Guide
215
Maintenance

Xerox versalink C7025 Specifications

General

Brand	Xerox
Model	versalink C7025
Category	All in One Printer
Language	English