Xerox versalink C7025 User Manual

Copy and Scan Problems
If the copy or scan quality is poor, refer to the following table.
Symptoms
Solutions
Lines or streaks only present in copies made from the
document feeder.
There is debris on the CVT glass. When scanning, the
paper from the document feeder passes over the
debris on the glass surfaces, resulting in lines and
streaks. Clean all glass surfaces with a lint-free cloth
dampened with water. For details, refer to Cleaning
the Scanner.
Spots present in copies taken from the document
glass.
There is debris on the document glass. When
scanning, the debris creates a spot on the image.
Clean all glass surfaces with a lint-free cloth
dampened with water.
Image is too light or too dark. Adjust the lighten/darken setting.
Image quality is poor when scanning color original
documents.
For best results, select Black & White output.
Colors are inaccurate. Adjust color settings and confirm that the correct
Original Type is set.
Perform the Scan Color Consistency procedure. For
details, refer to Color Registration.
If the problem persists, for online support information, go to www.xerox.com/office/VLC70XXsupport.
274
Xerox
®
VersaLink
®
C70XX Color Multifunction Printer
User Guide
Troubleshooting

Xerox versalink C7025 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 2400 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Automatic Duplexing	Yes
Display	5-inch color touchscreen
Memory	2 GB
Functions	Print, Copy, Scan
Print Speed	Up to 25 ppm
Connectivity	10/100/1000Base-T Ethernet, High-Speed USB 3.0
Mobile Printing	Apple AirPrint, Google Cloud Print, Mopria, Xerox Print Service Plug-in for Android
Processor	1.05 GHz
PDL	PCL 6, PDF, XPS