Xerox Versant 2100 - Page 201

Clearing Paper Jams in the AdvancedPunch Pro
Jam Clearance SolutionJam Area
If paper is jammed in the Punch Bypass, perform the following steps:
1. Lift the paper guide plate located.
2. Remove the jammed paper.
3. Close the paper guide plate by raising the handle to unlatch
the mechanism, and then slowly lower it.
If paper is jammed in the downward paper chute, perform the follow-
ing steps:
1. Move the lever to the left.
2. Remove the jammed paper.
3. Return the lever to its original location.
If paper is jammed in the left bottom chute, perform the following
steps:
1. Press the top lever while holding the bottom lever; this un-
latches the chute.
2. Continue to open the chute until it contacts the magnet
on the left side.
3. Remove the paper.
4. Return the chute to the closed position by returning the
lever to its original position; the latch mechanism is activ-
ated.
If paper is jammed in the right bottom chute, perform the following
steps:
1. Unlatch the chute.
2. Remove any jammed paper.
3. Return the lever to its original position.
If paper is jammed in the upward paper chute, perform the following
steps:
1. Move the lever to the right.
2. Remove the jammed paper.
3. Return the lever to its original location.
14-25Xerox
®
Versant
®
2100 Press
User Guide
GBC AdvancedPunch Pro