9
Maintenance
Maintenance Overview
This section includes information on how to maintain the press and how to replace
Customer Replaceable Units (CRUs).
Note
Also refer to the Diagnostic Tool CD provided with your system.
Cleaning the Press
Read and adhere to the following information when cleaning the press:
• Before you start to clean the press, be sure to switch off the power using the rear
breaker switch and unplug the press. Cleaning the press without switching off the
power may cause an electric shock.
• Always use a dry lint-free cloth for all cleaning actions unless otherwise directed.
• Do not use benzene, paint thinner, other volatile liquids, or spray insect repellent on
the press as doing so may discolor, deform, or crack covers.
• If a moistened cloth is used, wipe afterwards with a dry lint-free cloth. Cleaning the
press with an excessive amount of water may cause the press to malfunction and/or
damage documents during printing.
9-1Xerox
®
Versant
®
2100 Press
User Guide
To Next Page
Loading...
