9. Using the finger rings, install the new drum cartridge into the press with the side
marked front facing the front.
10. Press both ends of the drum cartridge to place it in a horizontal position.
11. Immediately close the drum cartridge drawer to protect the other drums from light.
12. Return the Release Handle to its original position.
13. Return the R1-R4 handle to the original position and close the press left and center
front doors.
14. Insert the used drum cartridge into an empty container for recycling.
4-11Xerox
®
Versant
®
3100 Press
Quick Start Guide
Maintenance
To Next Page
Loading...
