SNMP
Xerox
®
WorkCentre
®
3025
User Guide
160
Delete Community Names or SNMP Traps
1. From the SNMP page, in the Community Names or SNMP Traps area select the name or address
you want to delete.
2. Select Delete.
3. Select Yes.
Note: Changes made to the GET or SET community names for this machine will require
corresponding GET or SET community name changes for each application which uses the SNMP
protocol to communicate with this machine (e.g., Xerox CentreWare Web, any third party network
management applications, etc.).
To Next Page
Loading...
Need help?
General
