WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
235
• Daily - select this option to have cleanup occur daily. Type the hour and minute to 
indicate when the cleanup will begin.
• Hourly (top of hour) - select this option to trigger scheduled hourly maintenance. Note 
that this cleanup will occur every hour at the top of the hour.
d. Click on the [Apply] button.
e. Click on the [OK] button when you see the message “Properties have been successfully 
modified”.
Folders
This feature allows the System Administrator to perform maintenance on the created Scan to Mailbox 
folders that resides in the device. The System Administrator can change folder passwords, delete 
folders or delete scanned images within folders.
At your Workstation:
Note: To configure this feature or these settings access the Properties tab as a System 
Administrator. For details, refer to Access Internet Services as System Administrator on page 24.
1. From the Properties tab, click on the [Services] link.
2. Click on the [Scan to Mailbox] link.
3. Select [Folders] in the directory tree.
4. In the Created Folder Operations area:
a. From the [Select a Created Folder] drop-down menu, select the required folder.
b. To change the Folder password, enter new password in the [Change Folder Password] field 
and into the [Confirm Folder Password] field.
c. Click on the [Saved Password] button.
d. Click on the [OK] button when you see the message “Properties have been successfully 
modified”.
5. To permanently remove all files within the selected folder:
a. Click on the [Delete Files] button.
b. Click on the [OK] button when you see the message “Are you sure you want to delete all the 
files in the folder?”.
6. To permanently remove the folder and all the files contained in the folder:
a. Click on the [Delete Folder] button.
b. Click on the [OK] button when you see the message “Are you sure you want to delete this 
folder?”.
Scan Policies
This feature allows the System Administrator to set the scanning policies for the Scan to Mailbox 
feature on the device.