Xerox WorkCentre 5945 Quick Start Guide

Getting Started WorkCentre
®
XXXX
28 User Guide
6. Log In/Out: Use to enter log in details, and to log out.
7. Help: Displays help messages for device features.
8. Numeric Keypad: Use to enter alphanumeric characters.
9. Dial Pause: Use to insert a pause when dialing a fax number.
10. ‘C’ Cancel Entry: Cancels the previous entry made on the Numeric Keypad.
11. Language: Use to select a different language for the touch screen options.
12. Power: Use to select Energy Saver mode, perform a quick restart or to power on or off the
device.
13. Clear All: Press once to clear a current entry. Press twice to return to default settings.
14. Interrupt Printing: Use to pause the job which is currently printing, to run a more urgent copy
job.
15. Stop: Stops the job in progress.
16. Start: Use to start a job.
Power On and Off
Powering the Device On
1. Ensure that your device is connected to a suitable power supply and that the power cord is fully
plugged in to the electrical outlet of the device.
2. Press the Power button. The entire powering on process (to power on all installed options) takes
less than 3 minutes 50 seconds.
Note: If there are any pages in the document feeder input tray when the device powers on or
exits power save mode you will be prompted to reload the documents.
Powering the Device Off
Power Off ends the current session and turns off the device.

Xerox WorkCentre 5945 Specifications

General

Print Technology	Laser
Print Speed	Up to 45 ppm
Maximum Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Maximum Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Copy Speed	Up to 45 cpm
Copy Resolution	600 x 600 dpi
Processor	1.2 GHz Dual-core
Memory	2 GB
Fax	Optional
Fax Transmission Speed	33.6 Kbps
Maximum Paper Size	A3
Connectivity	USB, Ethernet
Paper Size	A4, A5
PDL	PCL6, PDF, XPS, TIFF, JPEG
Mobile Printing	Apple AirPrint
Dimensions	640 x 700 x 1140 mm
Scanner Type	ADF, Flatbed
Weight	Approx. 172.0 lb / 78 kg