WorkCentre 7220-7225 Information Assurance Disclosure Paper
Ver. 1.0, January 2013 Page 34 of 61
3.2.2.4. Xerox Secure Access
Via Xerox Secure Access a customer can enable additional authentication methods to the device with minimal
impact on the system software. By using a Web Service and 3rd party equipment, any authentication method that
complies with the established interface into the device can be used. This includes biometric and card access.
Xerox Secure Acess is a Web Service that allows a 3rd party to use its own mechanisms, including accessing the
customers authentication servers, to authenticate a user. The device can also take in additional information about
the user to allow for two-factor authentication.
The Web Service interface allows the 3rd party to tell the device that someone was successfully logged in, who
logged in and inform the device of logon issues using error messages.
The authentication steps are:
1) The device presents the appropriate screens to tell the user what needs to be done to authenticate.
2) The user follows the authentication instructions like swiping a card and/or entering a PIN or password.
3) User is authenticated and the device will complete any Authorization and Personalization as would have
been done if the user authenticated using a system supplied solution.
3.2.2.5. DDNS
The implementation in the device does not support any security extensions.
To Next Page
Loading...
Need help?
General
