Xerox WORKCENTRE 7425 User Manual (English)

Other manuals for Xerox WORKCENTRE 7425

User Guide266 pages

System Administrator Guide208 pages

Guide D'Utilisation276 pages

Supplementary Guide49 pages

Ghid De Utilizare280 pages

Software Upgrade2 pages

Brochure & Specs8 pages

Specifications15 pages

Evaluator Guide32 pages

Questions and Answers:

G
Gregory HerreraJul 26, 2025
How to fix a Xerox WORKCENTRE 7425 All in One Printer that does not turn on?
- J
  Jacqueline PotterJul 26, 2025
  If your Xerox All in One Printer doesn't turn on, first ensure the power cord is securely plugged into the outlet. If it still doesn't work, test the outlet with another device or try a different outlet. Also, make sure the power switch is turned on. If the issue persists, check that the outlet's voltage and frequency match the printer's specifications, as detailed on page 243.
D
David SchneiderJul 31, 2025
What to do if my Xerox WORKCENTRE 7425 resets or turns off frequently?
- M
  Marc RyanAug 1, 2025
  If your Xerox All in One Printer is resetting or turning off frequently, ensure the power cord is correctly plugged into both the printer and the outlet. If the issue continues, it might be due to a system error. In that case, contact your local Xerox service representative with the error information and check the error history; more information can be found on page 192.
K
Katie JimenezAug 6, 2025
Why is printing taking too long on my Xerox WORKCENTRE 7425 All in One Printer?
- C
  Crystal PowellAug 7, 2025
  If printing takes too long on your Xerox All in One Printer, it could be due to a slower printing mode being enabled for special media like heavyweight stock or transparencies. When using regular paper, verify that the media type is correctly set in both the driver and the printer's control panel. Also, the printer might be in ENERGY SAVE mode, which delays the start of printing. If the job is complex, simply wait, as no action is needed.
R
Richard BakerAug 12, 2025
Why is my Xerox All in One Printer making unusual noises?
- A
  Allison AlvarezAug 13, 2025
  If your Xerox All in One Printer is making unusual noises, ensure it is placed on a flat, hard, level surface. Also, try opening and closing the tray you are printing from to ensure it is correctly installed. If the noise persists, turn off the printer and check for any obstructions or debris inside. If you cannot remove the obstruction, contact your local Xerox service representative.
C
Christina SmithAug 18, 2025
How to troubleshoot duplex problems on a Xerox All in One Printer?
- H
  hmorganAug 19, 2025
  If you are experiencing duplex problems with your Xerox All in One Printer, ensure that you are using the correct media. Avoid duplexing custom-sized media, transparencies, envelopes, labels, plain reload, lightweight, HW reload, extra HW, HW gloss, or HW gloss reload. Also, make sure that 2-Sided Printing is selected in the printer driver.

Xerox WORKCENTRE 7425 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Speed (Black)	25 ppm
Print Speed (Color)	25 ppm
Print Resolution	1200 x 1200 dpi
Connectivity	USB, Ethernet, Wi-Fi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 kbps
Mobile Printing	Yes
Operating System Compatibility	Windows, Mac, Linux
Copy Speed (Black)	25 cpm
Copy Speed (Color)	25 cpm
Display	Color Touch Screen