Scan to E-mail
WorkCentre 7425/7428/7435
System Administrator Guide
103
4. Set the E-mail address, host name, and domain name.
a. Select the Tools tab.
b. Select Connectivity & Network Setup.
c. Select Machine’s E-mail Address/Host Name.
d. Select E-mail Address and then select Change Settings.
e. Enter an E-mail address using the displayed keyboard.
f. Select Save.
g. Set a host name and a domain name.
h. Select Close.
If SMTP has been selected as the Mail Receiving Protocol
Aliases cannot be configured. A user can choose an account name (the left side of the @). An address
(the right side of the @) is a combination of a host name and a domain name.
Example: mymail@myhost.example.com
• Account name: mymail
• Host name: myhost
• Domain name: example.com
To Next Page
Loading...
Need help?
General
