Printer Management
WorkCentre 7425/7428/7435
System Administrator Guide
178
4. Touch the Tools tab.
5. Press Copy Service Settings.
6. Press Copy Control.
7. Press the down arrow to scroll to the Bates Stamping selection lines.
8. Press the applicable Bates Stamp position lines to set the precise location for your Bates stamp,
using x and y axes.
9. Press Change Settings to change settings.
10. Press Save to save your changes.
11. Press Close until the System Settings screen is displayed.
12. Press Exit on the System Settings screen to return to the Main (All Services) screen.
To Next Page
Loading...
Need help?
General
