Xerox WORKCENTRE 7428 User Manual

TCP/IP Protocol Configuration
WorkCentre 7425/7428/7435
System Administrator Guide
45
Exiting the Protocol Settings Menu and Returning to the Tools Tab
1. To exit the Protocol Settings menu, returning to the Tools tab, press the Close button in the upper
right corner of the Protocol Settings menu screen.
2. Wait several seconds and the Auto Clear service should log you out.
Note: If you changed any settings in the Protocol Settings menu, the printer will automatically reboot
to register and enable your new settings.

Xerox WORKCENTRE 7428 Specifications

General

Brand	Xerox
Model	WORKCENTRE 7428
Category	All in One Printer
Language	English