15
Initial Settings Procedures Using
CentreWare Internet Services
This section describes the initial settings related to Security Features, and how to set them on CentreWare Internet
Services.
Preparations for settings on the CentreWare
Internet Services
Prepare a computer supporting the TCP/IP protocol to use CentreWare Internet Services.
CentreWare Internet Services supports the browsers satisfied "SSL/TLS" (1.8) conditions.
1. Open your Web browser and enter the TCP/IP address of the machine in the Address or Location field, press
the <Enter> key at Your Workstation.
2. Enter the System Administrator’s ID and passcode if prompted.
3. Display the [Properties] screen by clicking the [Properties] tab.
Set SMB
1. Click [+] on the left of the [Connectivity] folder on the [Properties] screen.
2. Click [Port Setting].
3. Uncheck the [NetBEUI] box for [SMB].
4. Click the [Apply] button.
To Next Page
Loading...
